Logo

Pallet Racking

Home » Products » Pallet Racking

Warehouse Selective Pallet racking

 1.  Product Description: 

Warehouse Selective pallet racking, which is also known as conventional pallet rack, is one of the most economic solutions for industrial palletized goods storage. It is compatible with all type of handling equipment. It is efficient and 100% selectivity. It is simple and good for first in first out application. Its disadvantage is low utilization of floor space. The system is found in many warehouses, logistic center, commercial distribution center etc.

 



2. Product Specifications:
Selective pallet racking is composed of basic element such as frames and beams. It also consists of a full range of accessories to fulfill all of your requirements. The system is designed for the optimized storage of goods of all sizes and weights. 

 Product Details:

The frames are composed of 2 uprights and a number of diagonals. The frames are bolted, resulting in a lower repair cost if they are damaged by lift trucks.

Each connection is secured with a safety lock.

The uprights are very accurately cold-formed, they can be produced in lengths of up to 12m for a single piece.

 



The box beam is composed of two cold-formed C-profiles, or it can also be made from a complete rectangle section. It is very resistant to torsion and provides great stiffness in both horizontal and vertical directions, with a load bearing capacity of up to 3-4 tons per beam level. 

For upright and beams, there are different sections and thickness to serve various loading requirment. Our standard specifications are listed below

 

Main Components

Section size

Thickness

Material

Upright

80*60

1.5, 1.8

Q235B

90*70

1.8, 2.0

Q235B

100*70

2.0, 2.3, 2.5

Q235B

100*80

2.0

Q235B

100*95

2.0, 2.3,2.5

Q235B

120*95

2.3, 2.5,

Q235B

120*95

2.75, 3.0

Q235B

Box Beams

80*50*1.5

1.5

Q235B

100*50*1.5

1.5

Q235B

110*50*1.5

1.5

Q235B

120*50*1.5

1.5

Q235B

140*50*1.5

1.5

Q235B

160*50*1.5

1.5, 1.8

Q235B

180*50*2.0

1.8, 2.0

Q235B

 

The finish of all painted parts is an Epoxy-powder coating polymerized at 180 °C. 
The standard colors are RAL 5010 (= Dark Blue) for the frames and RAL 2004 (=pure orange) for the beams. Protectors are painted in RAL 1008 (= golden yellow). Some smaller parts have a galvanized finishing. Special colors are available on request. 
 

Available accessories: 

The optional accessories include Pallet support bar, Wire mesh decking, Grating panel, Steel shelves, Corner guard, Barrier, Frame protector, etc.  

 

 


3.  Product Advantages

  • Direct access to each pallet
  • Simple stock management
  • Adaptable to any product volume, weight or size
  • Cost savings through wide span beams with piston lock connectors

4. Information for RFQ: 

Before you send us your request for quotation, please make sure the following information are collected.

 Please send us the following information unless you already have the material bill of quantities with full specifications:

  1. Warehouse layout CAD drawings if available. 
  2. Pallet size LWH, pallet entry side, Overall height of the goods with pallets. 
  3. Loading weight per pallet for design purpose.
  4. Clear height of the warehouse.
  5. Your forklift information, working aisles width, forklift  max. reaching height. 
  6. Your intra logistic flow..
 
  • Private Policy